A staircase sees constant footfall, so the material needs to combine strength with safety and good looks. We cut staircase steps, risers and treads to your exact site drawing at our own facility, with anti-skid nosing available on every stone type.
Natural stone — granite, marble or sandstone — combines strength, safety and good looks in a way tiles can't match; unlike tiles, a solid stone step resists chipping at the edges for years. Because we cut every step at our own facility and deliver onsite ourselves, there's no middleman adding cost or delay to a staircase order.
Anti-skid nosing is available across every stone type we carry, for added safety on daily-use stairs.
A dense, uniform black finish that reads as a strong architectural statement on both indoor and covered outdoor staircases.
Enquire About Absolute BlackStatuario and Calacatta veining bring a premium, gallery-like feel to feature staircases in formal entryways and lobbies.
Enquire About Italian MarbleNatural slip resistance and graceful weathering make sandstone the practical choice for garden paths and outdoor staircases.
Enquire About SandstoneBudget-friendly, matte-finish stone commonly used for utility and service staircases where cost efficiency matters most.
Enquire About Cuddapah/KotahGrooved or flamed finish on the front edge of each tread, reducing slip risk for daily use.
Solid stone treads hold up to years of foot traffic, luggage, and furniture movement without chipping.
Sandstone and flamed granite handle open, outdoor staircases through Bangalore's monsoon and heat.
Unlike wood or laminate stairs, stone treads don't need periodic refinishing or replacement.
Choose the finish per flight — polished for a formal lobby, anti-skid for daily-use flights.
Correctly fitted stone stairs easily outlast the rest of the building's interior fit-out.
We take exact tread and riser dimensions from your site or staircase drawing, flight by flight.
Choose your stone, plus a polished, flamed or grooved anti-skid finish per flight based on traffic and design.
Treads and risers are cut to size, with anti-skid nosing profiled onto the front edge of each step.
Steps are delivered and fitted flight by flight, levelled, grouted, and checked before we sign off the job.
Stone staircases need very little upkeep, but a few habits keep the anti-skid nosing and polish performing well. Sweep or vacuum regularly to keep grit from scratching the surface underfoot, and clean with a pH-neutral stone cleaner rather than acidic or abrasive products.
For marble stairs, wipe up spills promptly since marble is more porous than granite, and reseal polished stone stairs roughly every 12–18 months to maintain slip resistance and shine.
Prevents loose dust and grit from scratching the polished surface.
Avoid bleach, ammonia or vinegar-based products on polished treads.
Maintains slip resistance and shine on high-traffic flights.
Depending on step span and load requirements.
Polished for feature stairs, flamed/grooved anti-skid for daily-use stairs.
Cut precisely to your staircase drawing.
Matched to the staircase's traffic level and design.
Plus Cuddapah and Kotah stone for budget-friendly utility staircases.
Site measurement, factory cutting and onsite fitting, handled end-to-end.
Granite is more scratch and slip resistant, making it ideal for daily-use staircases, while marble offers a more premium look best suited to lower-traffic or feature staircases with an anti-skid finish.
We provide anti-skid grooved or flamed finishes on the front edge of each step (nosing), significantly reducing slip risk on granite, marble and sandstone stairs.
Steps (treads) and risers are cut to your exact site drawing, with tread depths typically between 250mm-300mm and riser heights per your staircase design.
Yes, sandstone and flamed granite are commonly used for outdoor steps and garden staircases for their slip resistance and weathering ability.
Once steps are measured and cut at our facility, onsite fitting typically takes 2–4 days for a standard residential staircase, depending on the number of flights and whether risers are also being clad.
We supply and fit both treads (the horizontal step surface) and risers (the vertical face between steps), cut and finished as a matched set for a consistent look.
Bullnose, bevel, and grooved anti-skid nosing are the most common profiles for staircase steps, chosen based on the staircase's traffic level and the overall design of the space.
Yes — alongside our Bangalore showroom, we deliver staircase stone across most major cities in Karnataka and Kerala, as well as Chennai, Coimbatore, Hyderabad, Pune and Mumbai, with the same factory-direct pricing and onsite support.
Share your staircase drawing or step count — we'll quote factory-direct pricing.